CONTACT US
Contact Person：Ms.Vera;Ms.Elena
Mob：0086-13961615106；0086-18961680026
Direct line：0086-510-86625061
WhatsApp/Wechat：0086-13961615106
E-mail：vera@true-china.com
02
2021
-
09
The stainless steel PSA Nitrogen Gas Generator / Nitrogen Generation Plant manufacturer will show you the requirements of the site for the installation of the nitrogen generator
The manufacturer of Stainless Steel PSA Nitrogen Gas Generator / Nitrogen Generation Plant tells you that nitrogen generator system equipment generally does not have site foundation requirements, and the installation conditions can be met as long as the flat floor in the plant. However, for larger air compressors, compressed air drying equipment, etc., it will be implemented as required by the manufacturer. The manufacturer of Stainless Steel PSA Nitrogen Gas Generator / Nitrogen Generation Plant tells you that for the convenience of equipment maintenance and cleaning, it is better to make a flat surface 10cm above the ground at the location of the air compressor, drying equipment, nitrogen generator, and nitrogen purification device.
The manufacturer of Stainless Steel PSA Nitrogen Gas Generator / Nitrogen Generation Plant tells you that the air compressor and refrigerated dryer should be placed in the upwind or in a well-ventilated place. If there is no air storage tank behind the air compressor, the air compressor and the refrigerated dryer should be The distance between the two should be as large as possible, and the length of the pipeline between the two should be as long as possible, in order to reduce the temperature of the compressed air through the atmosphere. The manufacturer of Stainless Steel PSA Nitrogen Gas Generator / Nitrogen Generation Plant tells you that the distance between each device should be at least 1m, and the distance between each device and the wall should be at least 0.8m, and the operating surface of the device should face the direction that is convenient for the personnel to operate, so that the user can check Equipment operation and maintenance, overhaul.
The manufacturer of Stainless Steel PSA Nitrogen Gas Generator / Nitrogen Generation Plant tells you that the piping connection between the equipment depends on the actual situation after the equipment is in place. It is recommended that the piping connection be made by the user according to the needs.
The above articles introduced by the manufacturer of Stainless Steel PSA Nitrogen Gas Generator / Nitrogen Generation Plant are for reference only! The specific situation needs to be analyzed in detail!
Feedback
Related News
Contact Us
NO. 31-3, SHIZHUANG NEW STREET, HUANGTU TOWN JIANGYIN CITY JIANGSU PROVINCE CHINA
Copyright © 2022 2022 Jiangsu Tongyue Gas System Co.,ltd.