Website Registration/License: tyn2.com     Jiangsu ICP No.13049408     powered by:300.cn

pre-sale:0086-13812163901    after-sale:0086-13812137593  E-mail:vera@true-china.com

PRODUCTS

>
Product_detail

Product

Page view

Dew Point -40 Degree Nitrogen Generation Plant Psa Nitrogen Gas Generator

Now, nitrogen gas has been used widely in gas drilling of the oil-gas well, three times oil production operations, well completion, well repair, pressure upkeep and gas storage.
没有此类产品
I want to make an inquiry
Porduct Detail

Mobile nitrogen purity 99% Dew point -40 degree 20 feet container type PSA nitrogen generator onsite

 

 

Application in oil-gas territory:

 

Now, nitrogen gas has been used widely in gas drilling of the oil-gas well, three times oil production operations, well completion, well repair, pressure upkeep and gas storage. And the inertia of nitrogen and the high pressured nitrogen can be in collecting gas and the sweep of piping system to prevent inflammable gas burning and the underground pipes of oil field being corroded.

 

GAS Drilling

Improve the Penetration Rate

Reduce or Avoid Leakage

Extend the Service Life of Drill

Decrease the Complex Hole Problems

Reduce Completions and Stimulations

Protect and Found Producing Formulation

 

Three drilling operation

Keep the Well Pressure

Injecting into Oil Well with Carbureted Hydrogen,Nitrogen Oil-driving

Holder-on Work, Improve the Productivity of Oil and Gas

Air-lift Operation, Avoid Drilling Trouble

Thermal Extraction to Increase Recovery Efficiency

The Heat Insulation Effect of Wellbore When Steam Huff and Puff

Control the Mud Density

Clean Oil Well

The Ideal Vector of Surfactant

Increase the Service Life of the Well

 

Characteristics:


1.N2 purity is accurate and reliable due to the result displayed online on numeric meter;
2.Furnish four-grade filters and drier to remove water,oil and impurity of compressed air to ensure N2 generator running smoothly and steady guarantee life achieve more than 10 years;
3.Furnish N2 outlet filter ensure nitrogen gas clear and purity which is sufficient suitable for foodstuff packing;
4.Reasonable N2 purity,can be adjusted from 95% to 99.9%;
5.Compact in frame, light in weight, steady in performance and facilitated in operation.

 

Number Name

Specification

and Type

Manufacture Quantity Main Technological Indexes
  •  
Air Compressor Pry
  •  
Screw air Compressor G355 Atlas-Copco 1 Set

Rated Air Capacity:≥57Nm3/min

Rated Pressure:0.8MPa

Oil Content in Air:≤3ppm

Air Temperature:≤Ambient Temperature +70-80℃

Cooling Method:Air Cooling

Power Rating:355KW

Driving Mode:

External Dimension: 4174*2120*2500mm

  •  
Air Storage Tank CG1/8 TRUE GAS 1 Set

Rated Pressure:0.8Mpa

Volume: 1m3

Material:Carbon Steel

  •  
Air Handling
  •  

Three Level Filters

 

CF006

TF006

AF006

 

Italy ATS

 

3 pieces

Rated Pressure:1.0Mpa

Connection Mode:DN25

Rated Handling Flow:25 Nm3/min

Air Quality After Filtration:

Particulate≤0.01μm

oil≤0.003ppm

Filter Pressure Drop:≤0.2bar

Filter of all levels of the configuration system shall be configured with timed electronic discharge valve and manual draining valve.

  •  
Refrigeration Dryer HF-25 TRUE GAS 1Set

Rated Pressure:0.6-1.0MPa

Rated Handling Flow:25Nm³/min

Pressure Loss in the System:≤0.2bar

Rated Inlet Air Temperature:≤50℃

Outlet Air Dew Point Temperature :3℃

Power Rating:4.5KW

  •  

 

Connecting Pipeline and Valve

/ TRUE GAS 1 Set

Structure:Seamless Steel Tubes for Liquid Service

Material:Carbon Steel of High Quality

  •  
skid-mounted nitrogen generator
  •  
Molecular Sieve 3KT-172 Japan 1 Batch

Nitrogen Purity:≥99.9%

Capacity:300Nm³/h

Design Inlet Pressure:0.7Mpa

Design Operating Temperature:45℃

Maximum Operating Temperature:65℃

  •  
Absorption Tower XF-300 TRUE GAS 1 Set

Working Pressure:0.7Mpa

Material:Q235B

Design Pressure:0.8Mpa

  •  
PLC S7-200 Siemens 1 Set

Control Mode:PLC Control

Operating Voltage:24VDC

Output Form:Relay Output

All Components are Imported, Assembled to a Full Set Domestically

  •  
Pneumatic Valve

DN65

DN40

SKF

10 Pieces

6pieces

Start Mode:Pneumatic

Control Mode:Solenoid Valve

Material: Stainless 304

  •  
Solenoid Valve 3v-210 Taiwan AirTac 8 Pieces  
  •  
Nitrogen Gas Analyzer P860-5N Chang Ai 1Piece

Measuring Range:78%~99.99%

Principle of Sensors: Ion Beam; Nitrogen Sensor

Measuring Mode: Gas Inlet

  •  
Nitrogen Buffer Tank CG1/8 TRUE GAS 2 Piece

Rated Pressure: 0.8Mpa

Design Pressure: 0.84Mpa

Volume: 1 m3

Material: Carbon Steel

  •  
Flow Meter LZB-25

 

Changzhou Shuanghuan

3Piece

Rated pressure:1.0Mpa

Diameter:DN40

  •  
Craft Manifold,Valve / TRUE GAS 1 Set

Structure:Seamless Steel Tubes for Liquid Service

Material:Carbon Steel of High Quality

  •  
Skid-mounted / TRUE GAS 1Set

Structure: Steel Structure Base

Material:Low-Carbon Steel

  •  
Nitrogen Storage Tank CG5/8 TRUE GAS 1Piece

Rated Pressure:0.8Mpa

Design Pressure:0.84Mpa

Volume: 5m³

Material: Carbon Steel

  •  
Container 20 feet TRUE GAS 3 sets Material: Carbon steel
  •  
Other Auxiliaries
  •  
Finished Documents / TRUE GAS 1 Set Complete Set of Equipment Data
  •  
Accessories / TRUE GAS 1 Set Original Supporting Equipment Accessories

 

 

 

When the pressure rises, the carbon molecular sieve adsorbs the oxygen and produces the nitrogen gas. When the pressure decreases, the carbon molecular sieve starts to desorb the oxygen until the pressure equals to the ordinary pressure. At that time, the carbon molecular sieve desorbs the oxygen completely. The PSA nitrogen generator is usually equipped with adsorption towers. It controls the pneumatic valve by PLC, thus the two adsorption towers can produce the nitrogen gas alternatively. One tower adsorbs the oxygen and produces nitrogen gas, the other desorbs to regeneration to produces the required nitrogen.

SMT nitrogen generator combines the features of lead-free soldering in SMT industry, nitrogen purity is generally between 99.9%~99.999%, the flow of nitrogen generator of each soldering furnace is generally between 10~30Nm3/hr (special specifications are calculated according to actual flow), the dew point is between -40℃~-60℃, and nitrogen pressure is between 0.5-0.6MPa. SMT dedicated nitrogen making solution can make the flux correct and active, reduce the residual amount of flux, enhance soldering quality and make the soldered surface more attractive.

 

Technical Indicators

Nitrogen flow: 0-2,000Nm3/h O2: ≤1ppm Dew point: ≤-70℃ Nitrogen purity: 99.99%-99.999%

 

Dew Point -40 Degree Nitrogen Generation Plant Psa Nitrogen Gas Generator 0

 

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article