Website Registration/License: tyn2.com     Jiangsu ICP No.13049408     powered by:300.cn

pre-sale:0086-13812163901    after-sale:0086-13812137593  E-mail:vera@true-china.com

PRODUCTS

>
Product_detail

Product

Page view

3-10 Nm3/H 90% Purity Medical Small PSA Oxygen Generator System For Hospital Gas Pipeline System

The following parameters,drawings and photos are only for your reference.The final accurate product infomation will be supplied with the quotation packages.
没有此类产品
I want to make an inquiry
Porduct Detail

3-10Nm3/h 90% purity Medical small PSA oxygen generator system for hospital gas pipeline system



Oxygen Generator Range


90%-93% purity
1-1000Nm3/Hour capacity

NOTICE
The following parameters,drawings and photos are only for your reference.The final accurate product infomation will be supplied with the quotation packages.

Parameters

Oxygen purity: 90% - 93%
End pressure: 150 – 200 barG
Oxygen dew point: -60°C
Operating conditions: 5°C - 45°C

 

 

The process of oxygen generation plant


Oxygen Generator consist of two columns filled with molecular sieve(CarboTech AC Gmbh). Pre-treated compressed air enters the active column and follows up through the CarboTech. Nitrogen and the other gases are being adsorbed while the oxygen passes through. The active column is pressurized. When pressure is released, column becomes inactive and completely regenerate. In order to secure steady flow two columns are used, one is active while the other is inactive. At the end of cycle they switch roles.

Oxygen from oxygen generator enters oxygen buffer. From there regulated oxygen is fed into the high pressure oxygen compressor where the oxygen is boosted and fed the filling ramp where oxygen cylinders are filled.

Our comapct plant is built on the skid or frame with one central electric socket enabling quick start up. All components are already connected in the factory, so no extensive installation is required.

 

 

 

Working Principle

 

Atmospheric desorption PSA oxygen generator use the clean compressed air as raw material,zeolite molecular sieve as the adsorbing material ,use the pressure swing adsorption principle to get the oxygen under normal temperature.According to the difference adsorbing capacity of oxygen,nitrogen up the zeolite molecular sieve surface,and the difference diffusion rate of oxygen,nitrogen under ZMS,through Programmable Controller control the sequencing valve open/close,complete Pressure adsorption ,Decompression desorption process,complete Separation of oxygen and nitrogen ,get the demanded purity oxygen.

 

 

 

 

Main characteristic

 

1. Use the man-machine interface,intelligentize control,operation easy,supply the qualified oxygen in short time.

2. High efficiency fill in ZMS,tighter,solid,longer usage life

3. Use Siemens , OMRON PLC control and Germany BURKERT pneumatic valve to change system automatically,working stable.

4. Pressure,purity,flow can adjustable,to satisfied customers’ requirements.

5. Whole sealing design,Structural tension ,beautiful appearance,save floor area

 

Technical data Application fields

Purity:90%±3 Widely used in non-ferrous metal Capacity:1-1000Nm3/h metallurgy,chemical industry,

Pressure:0.1-0.6Mpa cement produce,pulp,

Dew point:≤40℃ paper making,glass stoves

Waste water/gas treatment

 

Application scope


1. Medical.The generator can be set up to fill the hospital pipeline directly and use the filling ramp as a backup system. Oxygen cylinders can be filled simultaneously or during hours with low consumption.

2.  Metallurgy: For anneal protection, agglomeration protection, nitrogenizing, furnace washing and blowing, etc. Used in fields such as metal heating treatment, powder metallurgy, magnetic material, copper process, metallic mesh, galvanized wire, semiconductor, etc.
3. Chemical and new material industries: For chemical material gas, pipeline blowing, gas replacement, gas protection, product transport, etc. Used in fields such as chemical, urethane elastic fiber, rubber, plastic, tyre, polyurethane, biological technology, intermediate, etc.
4. Electronic industry: For encapsulation, agglomeration, anneal, deoxidization, storage of electronic products. Used in fields such as peak welding, circumfluence welding, crystal, piezoelectricity, electronic porcelain, electronic copper tape, battery, electronic alloy material, etc.

 

Main parts of oxygen generator

 

Project Type Quantity Remark
PSA adsorption tower Professional design 2pieces/10kg Special pressure vessel manufacturer
Carbon Molecular Sieve MSC-3KT-172 3500kg Takeda Japan
Vortex airflow distributor Professional design 2 pieces Technical Carbotech from Germany
Self complement compact device Professional design 2sets Jiangyin Tongyue
single unit processing part / 1 set SMC-Japan
Sample pressure reduce valve / 1 piece SMC-Japan
Direct current 24V power / 1 set Taiwan-Mingwei

Pneumatic valves

Pneumatic valves

 

DN100 5 pieces Burkert Germany Burkert Germany
DN50 4 pieces
DN20 1 pieces
Magnetic valve 4V210-24V 10 pieces Taiwan Airtac
Metal flow meter LZZ-50 1 piece Changzhou Shuanghuan
Control system TPC7062K 1set (color touch screen )Kunlun Tongtai
Muffler TY-500X 1 set Jiangyin Tongyue
Pipe valve system bprofessional produce 1 set Jiangyin Tongyue
 

 

3-10 Nm3/H 90% Purity Medical Small PSA Oxygen Generator System For Hospital Gas Pipeline System 0

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article