Have any questions?  Tel: 0086-139 6161 5106  /   0086-189 6168 0026  /  vera@true-china.com

29

2021

-

09

Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical manufacturers will take you to understand: the precautions when installing the nitrogen generator


Product Category:

Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical manufacturers tell you that nitrogen generator system equipment generally does not have site foundation requirements, and the installation conditions can be met as long as the floor is level in the factory. However, for larger air compressors, compressed air drying equipment, etc., it will be implemented as required by the manufacturer. The manufacturer of Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical tells you that for the convenience of equipment maintenance and cleaning, a flat table 10cm above the ground at the place where the air compressor, drying equipment, nitrogen generator, and nitrogen purification device are placed is good.

Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical
Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical manufacturers tell you that the air compressor and refrigerated dryer should be placed on the upwind or in a well-ventilated place. If there is no air storage tank behind the air compressor, the air compressor and refrigerated dryer The distance between the two should be as large as possible, and the length of the pipeline between the two should be as long as possible, in order to reduce the temperature of the compressed air through the atmosphere. The manufacturer of Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical tells you that the distance between each device should be at least 1m, the distance between each device and the wall should be at least 0.8m, and the operating surface of the device should face the direction that is convenient for the personnel to operate, which is convenient for the user For equipment operation and maintenance, overhaul.
The manufacturer of Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical tells you that the pipeline connection between the equipment is determined by the actual situation after the equipment is in place. It is recommended that the pipeline connection be made by the user according to the needs.
The above articles introduced by Carbon / Stainless Steel PSA Nitrogen Generator For Pharmaceutical / Medical manufacturers are for reference only! The specific situation needs to be analyzed in detail!

Feedback


Related News